WARNING: This manual contains information on limitations regarding product use and function ..... NOTE: The PowerSeries security system includes specific false alarm reduction features and is classified in ... Your security system is made up of a DSC control panel, one or more keypads and various sensors and detectors.

Manual. W A R N I N G. This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should ..... alarm, the display will show the following message to indicate that a zone is open. ..... Indicates the loss of AC power.

If both modules do not show on the keypad, one of the following conditions may be present: • the keypad is not connected properly to the Keybus. • there is a problem with the Keybus wiring run. • the keypad does not have enough power. 1.6 Downloading. This product has an integrated RF5501-433 v5.0 receiver.

features have been implemented in your system. All users of this system should be equally instructed in its use. Fill out the “System Information” page with all of your zone information and access codes and store this manual in a safe place for future reference. NOTE: The PowerSeries security system includes specific false  ...

HS2016/HS2032/HS2064/HS2128. WARNING: This manual contains information on limitations regarding product use and function and ..... The PowerSeries Neo alarm panel is a feature-rich, scalable alarm system designed for residential ... lows: 9 (912-919 MHz), 8 (868MHz), 4 (433MHz). NOTE: Only models operating in ...

Thank you for purchasing the PC5132-433 Wireless Receiver. This product is the result of several years of development and will allow you to connect up to 32 wireless detection devices to the PC580, PC1555, and the Power series control panels. The PC5132-433 uses 433 MHz. It provides several advantages:.

need to manually re-enter programming and change to the desired zone type. IMPORTANT ... 3.5 Wireless Keys. The WP-433 can learn any DSC 433MHz wireless keys and will automatically enroll them as well ... into the hand held programmer simply wire and download to any Power Series Panel through its 4 wire ...

Check the connected printer for trouble (no power, out of paper, jam etc…). Trouble [3] General. System Trouble. The wireless receiver has detected excessive noise in the 433MHz range. (Power432, 632, 832 only). ▫ Check the installation for other sources of 433MHz wireless signals (could also be nearby transmission ...

This installation guide provides the basic wiring, programming and troubleshooting information required to install the PowerSeries Neo alarm controller. Use this ... with the PowerSeries Neo Reference Manual available online from the DSC website at www.dsc.com. ... as follows: 9 (912-919 MHz), 8 ( 868MHz), 4 (433MHz).

Voltage: Draws current from the PowerSeries Neo alarm controller (10.8VDC to 12.5VDC) - (Limited. Power Supply). ○. Frequency: 433MHz (HSM2HOST4), 868MHz (HSM2HOST8), 912-919MHz (HSM2HOST9UL). ○. Zones - can receive signals from up to 128 wireless zones, plus 16 wireless keypads. Also supports up ...

Thank you for purchasing the RF5108-433 Wireless Receiver. This product is the result of several years of development and will allow you to connect up to 8 wireless detection devices to the PC580, PC585, PC1555, PC1565, and the Power. Series control panels. The RF5108-433 operates at 433 MHz. It provides several ...

PowerSeries. PC1616/PC1832/PC1864 version 4.1. Installation Guide. Note to Installer:Center pages contain important end user information. Leave with End User. WARNING: This manual contains information on limitations regarding product use and function and infor- mation on the ..... PC5132-433 Wireless Receiver .

identified with DSC's product label and lot number or serial number; (iii) products disassembled or .... Control units, intrusion detectors, smoke detectors and many other security devices require an adequate power supply for proper ...... All devices are 433 MHz, fully supervised (see section 5.27 'Wireless. Expansion') see ...

tion Manual of the DSC wireless receiver and control panel with which this device is ... Enroll the WS4945 by programming the 6-digit serial number (located on ... and enrolling this device on PowerSeries receivers. For additional options or for other receivers please refer to the specific receiver installa- tion manuals.

WT5500P-433/868. Series 2-way Wireless Keypad. IMPORTANT: This manual contains information on limitations regarding product use and function and information ... The power supply must be Class II, FAIL SAFE with double or reinforced insulation between the PRIMARY and SECONDARY circuit/ENCLO-. SURE and ...

Warning – This manual contains information on limitations regarding product use and function and information on the limitations as to ..... Frequency: 433.92 MHz ... The TR5164 can receive signals from the following devices: Alarm Panel: PowerSeries V4.6+. Keypad: ULWT5500-433 V1.4+. Wireless Key: ULWS4939.

de varios años de desarrollo y le permitirá conectar hasta 8 dispositivos de detección inalámbricos a los paneles de control PC580, PC585, PC1555(MX), PC1565 y a aquellos que se encuentran bajo la denominación Power Series. El receptor RF5108-433 trabaja en la frecuencia de 433 MHz. Entre las ventajas que.

This guide shall be used in conjunction with the PowerSeries PC1616/1832/1864 Reference Manual .... DSCPTD 1640U. Class II Transformer. NOTE: Do not connect transformer to receptacle controlled by a switch. Incorrect connections may result in PTC failure or improper ..... Check for external 433MHZ signal sources.

imprimés et de la documentation « en ligne » ou électronique. •. Tout logiciel fourni avec le .... utilisant le modèle PC5132 (Récepteur RF à 433 MHz). • 2 partitions .... référence des PowerSeries PC1616/1832/1864 que vous pouvez obtenir auprès de votre fournisseur local ou télécharger sur le site Internet de DSC à ...

Warning: When using equipment connected to the telephone network, always follow the basic safety instructions provided with this product. ... Installation and user manuals, including the safety instructions (Read and save these instructions ! ..... Available hardware platforms for the 433 MHz versions are described below.